In recent years, hydroponic gardens have become increasingly popular among home gardeners. Homemade hydroponic methods are a fun and different way to grow produce in the home with no soil. Below are a couple of the very popular homemade hydroponic systems.


The Tank System


One of the simplest homemade hydroponic methods to build is the water civilization raft system, making use of a classic fish tank or tank. This program works well for vegetable gardens particularly, and you're able to build one for about fifty dollars using substances you are able to get at the neighborhood hardware shop. You might even have some of the materials just lying around the home.


To make this Doctor Ponic system, cut a 1" thick Styrofoam sheet to fit the top of an old fish tank or similar container. Then make holes in the Styrofoam for your plant roots. Make two small holes near the top of opposite sides of your fish tank for air tubing to experience. Attach this tubing close to the base of the tank with air stones and attach the other end of the tubing to the air pump.


Cover the tank with foil so that light doesn't get into the tank. Fill your tank with nutrient solution, then float the Styrofoam on top of it. Place your plants in the holes you cut from the Styrofoam in this manner that their roots dangle in the alternative. You're able to maintain the plants in place utilizing filter floss. To learn more about hydroponics, visit http://www.ehow.com/how_5417351_make-homemade-hydroponic-systems.html.


The Bucket System


Another one of the most popular homemade hydropinc systems is the "ebb and flow" system. This system can be produced with two large buckets. Simply drill a hole in both buckets about a half-inch from the bottom and connect them with tubing. You ought to have sufficient tubing to place one of the buckets on a platform while the other bucket, which will hold the nutrient solution, is left on the ground.


Place A few inches of gravel in the bucket your plants are to grow in, then cover it with a fine mesh plastic screen. The screen should fit tightly to the sides of the bucket. In addition to the screen, place perlite, rockwool, coconut fiber, or whatever other growth medium you've chosen to use.


After You've planted your seeds in the growth medium, fill the second bucket with nutrient solution and cover it with a lid to keep out foreign debris and dust. Then lift the nutrient bucket so it's on the platform with your grow bucket. This will permit the nutrient solution to flood your plants.


After Your plants have been well soaked, set the nutrient bucket back on the ground. This practice of flooding and draining your grow bucket will have to be repeated many times every day.


The Wick System


A third easy-to-make hydroponic system is the wick system. It's built much like the bucket ebb and flow system except that the 2 buckets are connected with an extremely absorbent wick as opposed to tubing. As the growth medium becomes dry, more solution is pulled up the wick by capillary action, eliminating the need to continually lift and lower the nutrient bucket.



The Wick method makes it possible for plants get a steady stream of solution without being Flooded and drained many times every day. It's Best to use this system with water-loving leafy vegetables, since the grow medium always remains soaked.